IS200TRTDH1BCC
IS200TRTDH1BCC
IS200TRTDH1BCC
input points and input signals, and output points and output controls. After
allocation, according to the channel and contact number configured by the system,
assign each input signal and output signal, that is, number. In some cases, there are
two signals with one input point, so the input point should be connected in a logical
relationship before the input point (such as two contacts in series or parallel), and
then connected to the input point. (1) Determine the I/O channel range of different
models of PLC, the range of the input/output channel is not the same, should be
according to the selected PLC model, consult the corresponding programming manual,
never “Zhang Li Di Di”. You must refer to the relevant operation manual. (2) Internal
auxiliary relays do not output externally and cannot be directly connected to external
devices, but are used for data storage or data processing when controlling other
relays, timers/counters.
1C31 series DCS system, CPU, OVATION system, WDPF system,
WEStation System spare parts.
:
Redundant fault-tolerant control system, modern fault-tolerant controller based on
Triple module redundancy (TMR) structure.
EMERSON: Spare parts for modules, cards,
drives, etc.
XYCOM: XVME series
Bently (Bentley) : 3500/3300 system.
Rockwell: ICS
systems.
ABB: PM full series DCS system, IGCT HIGH voltage inverter series, industrial
robot spare parts DSQC series, INFI 90, etc.
Bailey (Bailey) : BRC series DCS system,
etc.
Allen-Bradley: 1756, 1785, 1771, 1746 full series system, etc.
Yokogawa: CP series,
etc.
Honeywell (Honeywell) : TK/TC/CC systems, etc.
Reliance (Ryan) : 57C series, etc.
Schneider: 140 series processor, control card, power module, etc.
Modicon (Modicon) :