VE4032S2T2B1

machine interface)

Module identification with production operating parameters

c

Complete self diagnosis

Compact and rugged design

Front panel wiring

DIN rail (U-shaped) mounting well can be directly installed on the wall, which is simple and convenient

 

o

Allowable operating ambient temperature 60 C, automatic temperature monitoring

o

EMC (electromagnetic compatibility) conforms to en50082 standard

mouth

Certification: CE, Namur, CSA, csa-nrtl, FM class 1 div2, ghost, Lloyd

Installation area: Class 1 div 2

The PS supports the following types of fieldbus standards:

Profibus DP，up to 12 MBd

Modbus RTU，1200 to 38. 4KBd

Industrial” CAN I/0 Bus

o

Open CAN -Bus，up to 1 MBd

o

Foundation Fieldbus H1

up to 31. 25KBd

Foundation Fieldbus H2 (fast Ethernet)

HART

The system allows different types of field buses to be mixed and run simultaneously in the same field controller PS.

Industrial “field control explosion (AC800F) consists of the following components:

Basic unit pm802f

Power supply sa801f/sd802f

o

Ethernet network card ei801f/ei802f/ei803f

o

Fieldbus interface card fi810f/fi820f/fi830f

Various accessories

The main components of the field controller PS are described below.

Basic unit pm802f

The basic unit pm802f is composed of a metal rack and a CPU motherboard. It periodically scans the data from the

The signals of the field bus sensors are processed according to the control application program configured by the user, and then the calculation results are passed

The fieldbus interface card returns the corresponding fieldbus actuator.

Two field controllers can realize controller 1:1 redundancy, and undisturbed switching between master and slave PS. Two on each PS

Ethernet network card, the second network card is used to connect the system network diginets), and the second network cards can be interconnected with each other to form a special

Redundant communication link (diginetr) to ensure information synchronization between master and slave PS. — However, the master PS fails, and the slave PS can quickly and undisturbed connect the replacement worker

Make. All inputs and outputs also support redundant operation.

 

The data communication between the field process controller PS. operating station 0s and the engineer station es is completed