IS200TFBAH1A
IS200TFBAH1A
IS200TFBAH1A
standby diesel engine should be started to supply power to ensure the safety of the equipment.
According to the above control level requirements, electrical monitoring into DCS technology requirements are: 
(1) The generator system can realize program control and soft hand control to make the generator from zero lift speed, boost voltage until the grid connection belt initial load.
(2) The plant power system can be implemented according to the requirements of program control and soft hand operation in the start/stop stage and normal operation stage.
(3) It can display and record all kinds of data and states under the normal operation, abnormal operation and accident state of the above generation and change group system and the power plant system in real time, and provide operation guidance and emergency treatment measures.
(4) Unit unit (furnace mechanical and electrical) to achieve full CRT monitoring.
4 Requirements for DCS software and hardware
In order to better explain the electrical DCS into the software, hardware requirements, especially in order to make further detailed description of the software, the proposed project scale for 2 units, electrical main wiring using generator – transformer group unit wiring, connected to 220kV / 500kV distribution system, The busbar for 6kV high voltage factory of main
