IS200BAIAH1B
IS200BAIAH1B
IS200BAIAH1B
Siemens WinAC PROFINET CBA Communication (Chinese)
WinAC is a software package for Windows real-time extensions, a PC-based controller that has the same functionality as the SIMATIC S7 CPU. WinLC RTX(Windows Logic Controller with Real Time eXtensions) realizes PLC functions in a real-time PC environment. WinLC RTX supports PROFINET IO and CBA communications. This paper introduces the communication of PROFINET CBA of WinLC RTX. By creating components in Step7 and configuring components to communicate in iMap, it helps users to understand the features and use methods of the product.
Category: Siemens Information – Siemens WinAC – Siemens WinAC information classification: Technical manual
Siemens PC-based Automation Training Course (Chinese)
● PC-based automation
●SIMATIC WinAC product series
WinAC slot type
WinAC type real-time
WinAC basic
● Data processing function
Low WinAC ODK
Low WinAC T – KIT
Low summary
● Application Examples
??????????
Category: Siemens Information – Siemens WinAC – Siemens WinAC information classification: Technical manual
Siemens WinAC RTX 2009 0PC Communication (Chinese)
This section describes how to configure the communication between WinAC RTX 2009 and SIMATIC NET OPC.
WinAC RTX 2009 The WinAC RTX controller (soft controller) provides the same functions as the SIMATIC S7 CPU (hardware controller).
SIMATIC NET 2008 provides OPC server (V7.0) and OPC Scout tests SIMATIC NET OPC server connection with WinAC soft PLC.
STEP 7(HW Config and NetPro) is used to configure the WinAC RTX controller and PC Station.
Category: Siemens Information – Siemens WinAC – Siemens WinAC information classification: Technical manual
Siemens WinAC Product Profile (Chinese)
Siemens has developed a series of software and hardware components based on PC automation. These components enable all automation tasks including open-loop and closed-loop control, human-machine interface and motion control to be implemented in a PC platform. In both traditional PLC control and PC application occasions, PC-based control scheme will become your first choice.
· Extend the SIM ATIC S7 controller range to PC-based controllers
· Especially suitable for integrating many different tasks into a single PC: data processing, communication, visualization, special processes, and control
· Specific scope of application of WinAC:
– Fast program operation cycle (within O.1MS)
– Massive amounts of data computation and storage
– Integrate third-party devices (serial port, PCI board, TCP/IP device)
– Integration of complex algorithms or custom programs (multi-loop PID, motion control, formulation, board driver, protocol conversion, various control algorithms)
Features:
· Runs on a standard PC, based on WINDOWS 2000 or WINDOWS XP Professional
· Program code compatible with SIMATIC S7: SIMATIC industrial software is used for programming, and the created program can be used in SIMATIC S7
· Use standard interfaces for easy integration into OFFICE products
· Integration of open interfaces based on special process software and hardware solutions
Category: Siemens Information – Siemens WinAC – Siemens WinAC information classification: Product selection
Siemens WinAC RTX (Real-time) Introduction (Chinese)
Siemens WinAC RTX (Real-time) Introduction (Chinese)
Category: Siemens Information – Siemens WinAC – Siemens WinAC information classification: Product selection
It’s 4 pages, page 3, first page, last page, top page, next page
An introduction to PC-based control
Windows Automation Center with Real-Time Extensions (WinAC RTX 2009) package includes the following components:
● Windows Logic Controller RTX (WinLC RTX V4.5)
Low IntervalZero RTX V8.1
● IntervalZero RTX SP1 for V8.1
● WinAC Time synchronization V4.1
● Automated Authorization manager V4.0
● SIMATIC NET 2008 V7.1HF1 licensed with Softnet S7 Lean V7.1
SIMATIC Process Control System PCS7 V7.0 PC Configuration and Authorization Operation manual (Chinese)
Provides an overview of the PC components used in PCS 7. It contains the following information:
● PC components that can be used in PCS 7 applications
● Hardware and software required for specific PC components
● Licenses required for each product
● Possible PC configuration for an application
How to set up and configure the PC network SIMATIC PCS7 product introduction (Chinese)
SIMATIC PCS 7 is Siemens based on TELEPERM series distributed system and S5,S7 series programmable controller, combined with the most advanced electronic manufacturing technology, network communication technology, graphics and image processing technology, fieldbus technology, computer technology and advanced automation control theory, for all
ATIC PCS7 V7.0 can not only automatically complete the production process from material input to product output in a unified and integrated way, but also integrate the existing electrical infrastructure into the process control system. This means that an integrated automation solution for the entire production site is also available with SIMATIC PCS 7 V7.0.
SIMATIC PCS 7 is seamlessly Integrated into TIA (Totally Integrated Automation) and includes a full range of collaborative products, systems and solutions to achieve a unified and customizable automation system for all production, process and
