IS200DAMDG2A
IS200DAMDG2A
IS200DAMDG2A
internal architecture of WinAC RTX, and introduces the installation and configuration process of WinAC RTX 2008 software.
WinAC RTX is a soft PLC that can realize the function of S7 controller (S7-300/400), which is an application software running on Windows with RTX real-time extension. It can be programmed through Step 7, and the code is fully compatible with S7-300/400. It can also be programmed through the interface provided by WinAC ODK in Win
1. What is WinAC MP
WinAC MP is a real-time soft PLC that realizes the function of S7 controller (S7-300) on multi-function panel MP177, MP277, MP377, and runs on Windows CE. WinAC MP 2008 is the current latest version of WinAC MP (V4.1.1).
2. Application of WinAC MP
WinAC MP makes multi-functional panel MP177, MP277, MP377 in addition to HMI function, at the same time with PLC function. After installing the WinAC MP, the multi-function panel can extend distributed I/O through its PROFIBUS interface or communicate with other S7 devices (S7-200/300/400 PLC, HMI, PG, etc.).
Category: Siemens Information – Siemens WinAC – Siemens WinAC information classification: Technical manual
Siemens WinAC Product Overview (Chinese)
SIMATIC WinAC is the core component of PC-based control developed by Siemens, which extends the control range of SIMATIC S7. WinAC is a veritable control center, it will PLC control, data processing, communication, visualization and process integration in a PC. SIMATIC WinAC products are classified into software and slot types, including the following five products:
1. WinAC Basis (WinAC basis)
WinAC Basis is a low-cost solution for control without precise time requirements, a large number of fast data processing and control tasks (control tasks refer to PLC control functions) combined or other PC tasks control occasions.
2. WinAC PN
The first SIMATIC CPU to support PROFInet communication standard, performance similar to WinAC Basis. WinAC PN supports Component-based Automation (CBA) and PROFInet communication standards. Component-based automation and PROFInet provide an open standard for data exchange between mechanical and system units in complex tasks. Data exchange is configured using the SIMATIC iMap tool. WinAC PN is suitable for the following tasks:
? Coordination and connectivity between machinery and workshop areas from across the complex system
? Control system units or machinery can be integrated into a full range of complex systems
WinAC Basis 4.1 has an option WinAC PN, and WinAC Basis 4.1 with the WinAC PN option supports PROFInet and CBA.
3. WinAC RTX(WinAC Real-time)
WinAC RTX provides the real-time subsystem of Windows 2000/XP with “hard real-time” and “crash resistant” features. It is suitable for control tasks with high speed and precise time requirements, such as motion control, closed-loop control, etc.
4. WinAC MP
WinAC MP is based on the WinCE operating system and the SIMATIC MP370(a multi-function panel) hardware platform. The MP370 is designed to be hard disk and fan free, and WinCE has real-time features that enable strict deterministic actions. WinAC MP is used in harsh industrial environments and where there is a lot of data to process.
5. WinAC Slot 412/416
It is inserted in the PC in the form of a board card, on which the CPU, memory and other components for controlling tasks have been integrated. It can be controlled independently from PC. An MPI/DP interface and a DP interface are integrated on the board. WinAC Slot is suitable for situations with high security and stability