IS200HFPAG2A
IS200HFPAG2A
IS200HFPAG2A
RTX is a soft PLC that can realize the function of S7 controller (S7-300/400), which is an application software running on Windows with RTX real-time extension. It can be programmed through Step 7, and the code is fully compatible with S7-300/400. It can also be programmed through the interface provided by WinAC ODK in Win
1. What is WinAC MP
WinAC MP is a real-time soft PLC that realizes the function of S7 controller (S7-300) on multi-function panel MP177, MP277, MP377, and runs on Windows CE. WinAC MP 2008 is the current latest version of WinAC MP (V4.1.1).
2. Application of WinAC MP
WinAC MP makes multi-functional panel MP177, MP277, MP377 in addition to HMI function, at the same time with PLC function. After installing the WinAC MP, the multi-function panel can extend distributed I/O through its PROFIBUS interface or communicate with other S7 devices (S7-200/300/400 PLC, HMI, PG, etc.).
Category: Siemens Information – Siemens WinAC – Siemens WinAC information classification: Technical manual
Siemens WinAC Product Overview (Chinese)
SIMATIC WinAC is the core component of PC-based control developed by Siemens, which extends the control range of SIMATIC S7. WinAC is a veritable control center, it will PLC control, data processing, communication, visualization and process integration in a PC. SIMATIC WinAC products are classified into software and slot types, including the following five products:
1. WinAC Basis (WinAC basis)
WinAC Basis is a low-cost solution for control without precise time requirements, a large number of fast data processing and control tasks (control tasks refer to PLC control functions) combined or other PC tasks control occasions.
2. WinAC PN
The first SIMATIC CPU to support PROFInet communication standard, performance similar to WinAC Basis. WinAC PN supports Component-based Automation (CBA) and PROFInet communication standards. Component-based automation and PROFInet provide an open standard for data exchange between mechanical and system units in complex tasks. Data exchange is configured using the SIMATIC iMap tool. WinAC PN is suitable for the
