IS200IGEHG1A
IS200IGEHG1A
IS200IGEHG1A
(soft controller) provides the same functions as the SIMATIC S7 CPU (hardware controller).
SIMATIC NET 2008 provides OPC server (V7.0) and OPC Scout tests SIMATIC NET OPC server connection with WinAC soft PLC.
STEP 7(HW Config and NetPro) is used to configure the WinAC RTX controller and PC Station.
Category: Siemens Information – Siemens WinAC – Siemens WinAC information classification: Technical manual
Siemens WinAC Product Profile (Chinese)
Siemens has developed a series of software and hardware components based on PC automation. These components enable all automation tasks including open-loop and closed-loop control, human-machine interface and motion control to be implemented in a PC platform. In both traditional PLC control and PC application occasions, PC-based control scheme will become your first choice.
· Extend the SIM ATIC S7 controller range to PC-based controllers
· Especially suitable for integrating many different tasks into a single PC: data processing, communication, visualization, special processes, and control
· Specific scope of application of WinAC:
– Fast program operation cycle (within O.1MS)
– Massive amounts of data computation and storage
– Integrate third-party devices (serial port, PCI board, TCP/IP device)
– Integration of complex algorithms or custom programs (multi-loop PID, motion control, formulation, board driver, protocol conversion, various control algorithms)
Features:
· Runs on a standard PC, based on WINDOWS 2000 or WINDOWS XP Professional
· Program code compatible with SIMATIC S7: SIMATIC industrial software is used for programming, and the created
