IS215UCVDH5AA
IS215UCVDH5AA
IS215UCVDH5AA
synchronization between master and slave PS. — However, the master PS fails, and the
slave PS can quickly and undisturbed connect the replacement worker
Make. All inputs and
outputs also support redundant operation.
The data communication between the field
process controller PS. operating station 0s and the engineer station es is completed by
the system network (diginets), which is inserted
The – Ethernet network card on the PS
basic unit provides the interface between PS and diginets. ES. Hardware configuration
and PS
The user program is downloaded to the PS CPU through diginets and the first
network card. After the field bus interface card is newly installed or replaced, the
required group
The status information will be automatically reloaded. The configuration
results and real-time process data are stored in RAM, and ram is installed on the
Ethernet network card or battery card
The backup battery can maintain the configuration
content and data in case of power failure.
Basic unit pmbo2f characteristics:
mouth
Installation slots of 4 fieldbus interface cards
c
Installation slot of 2 Ethernet
network cards
Support redundant operation of Fieldbus interface card
Support hot plug of
Fieldbus interface card
Technical indicators of basic unit pib02f:
CPU :Intel
80960HT25/75
32-bit RISC superscalar processor with operation speed of 150 MIPS
4 MB
FLASH-EPROM
EEPROM,serial, 16 Kbit
o
Ram 8 MB (with error check and correction function,
abb patent)
16 K internal cache (CPU cache RAM)
Ram backup battery (matchdog, optional
redundancy)
Equipment internal temperature monitoring
Watchdog
I/0 sweeping cycle:
configurable.
Time required to process 1000 IL (instructions):
< 1.0 ms (processing
binary and 16 bit arithmetic instructions)
<2ms (processing fixed-point arithmetic