IS215UCVEM01A
IS215UCVEM01A
IS215UCVEM01A
maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes,
RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant
operation is realized by two redundant field controllers.
Fi8i0f card is a triple can
bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional
process control station
The i/0 protection unit of the PS is used to receive process
signals from the rack mounted i/0 modules supported by the PS. Each field controller PS
can only be configured
-Block fi810f card. — The two fi810f interface cards on the
redundant PS. can be switched redundantly.
S800 and S900 are distributed i/0 for process
control stations. They communicate with their controllers through Prof ibusdp Fieldbus
Communication, which can be installed in the controland PA three levels, DP
communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The
biggest feature is its super sturdiness and data security. The system of course also
supports Modbus. The communication with the intelligent field instrument is through
IART
protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between
the operation management level and the process control level is realized by Di giNetS
network (Industrial Ethernet/IEEE802.3 standard),
Users can choose the communication
transmission medium (ordinary cable or optical fiber) and network topology according to
the actual situation of the application.
The popular PC and MS_ Windows 2000 have been
widely used in various fields all over the world, becoming the de facto standard
computer platform.
tower. The operating station 0S, the engineering station ES an
