IS200JPDLG1A
IS200JPDLG1A
IS200JPDLG1A
WinAC MP makes multi-functional panel MP177, MP277, MP377 in addition to HMI function,
at the same time with PLC function. After installing the WinAC MP, the multi-function
panel can extend distributed I/O through its PROFIBUS interface or communicate with
other S7 devices (S7-200/300/400 PLC, HMI, PG, etc.).
Category: Siemens Information –
Siemens WinAC – Siemens WinAC information classification: Technical manual
Siemens WinAC
Product Overview (Chinese)
SIMATIC WinAC is the core component of PC-based control
developed by Siemens, which extends the control range of SIMATIC S7. WinAC is a
veritable control center, it will PLC control, data processing, communication,
visualization and process integration in a PC. SIMATIC WinAC products are classified
into software and slot types, including the following five products:
1. WinAC Basis
(WinAC basis)
WinAC Basis is a low-cost solution for control without precise time
requirements, a large number of fast data processing and control tasks (control tasks
refer to PLC control functions) combined or other PC tasks control occasions.
2. WinAC
PN
The first SIMATIC CPU to support PROFInet communication standard, performance similar
to WinAC Basis. WinAC PN supports Component-based Automation (CBA) and PROFInet
communication standards. Component-based automation and PROFInet provide an open
standard for data exchange between mechanical and system units in complex tasks. Data
exchange is configured using the SIMATIC iMap tool. WinAC PN is suitable for the
following tasks:
? Coordination and connectivity between machinery and workshop areas
from across the complex system
? Control system units or machinery can be integrated
into a full range of complex systems
WinAC Basis 4.1 has an option WinAC PN, and WinAC
Basis 4.1 with the WinAC PN option supports PROFInet and CBA.
3. WinAC RTX(WinAC Real-
