IS200TVBAH2A
IS200TVBAH2A
IS200TVBAH2A
using MPI protocol
3 CP5613 NIC using Profibus-DP protocol
4 3com network adapter, TCP/IP
protocol describes the EC31-RTX install
ation and use of the detailed steps and
precautions.
EC31-RTX is a modular embedded controller designed according to the S7-300
specification. Windows XP Embedded SP2 Feature Pack 2007,WinCC RTX 2008 SP1, and
SIMATIC NET 2008 SP2(SIMATIC NET IE Softnet S7-Lean) have been preinstalled before
delivery Edition 2008) and is configured to be used when the user connects to the power
supply.
EC31-RTX is equivalent in function to a S7-300 PLC and a PC with SIMATIC NET
2008 installed. The hardware and software components of Windows Automation Center
(WinAC) allow the user to set up a data center on a PC
A combined solution of
management, control, visualization and communication (PC-BASED control). The following
versions of WinAC products are available:
412 · WinAC Slot
416 · WinAC Slot
Pc-based
control for WinAC Slot 412/WinAC 416
In the top line of PLC applications, the number of
PC tasks (such as data processing and visualization) has been increased. The use of
PC-based control (= using a PC with an integrated PLC) is a more common solution than
using standard PLC communication with a PC link. Pc-based control combines PLC with
data processing on a PC with WinAC Slot 412/WinAC Slot 416.
WinAC Slot/WinAC Slot 416
integrates open-loop control and closed-loop control automation tasks, data processing,
communication and visualization in a single PC. WinAC Slot/WinAC Slot 416 is based on
the original Windows NT and integrates into the office world using standard interfaces.
WinAC stands for Windows Automation Center.
WinAC Controlling with CPU 41x-2 PCI
WinAC
Controlling is the controlling component for WinAC Slot 412/WinAC Slot 416. WinAC
Controlling performs the tasks of a traditional programmable logic controller and is
fully integrated into the PC. WinAC Controlling consists of either CPU 412-2 PCI or CPU
