IS200VAICH1D
IS200VAICH1D
IS200VAICH1D
controlled independently from PC. An MPI/DP interface and a DP interface are integrated
on the board. WinAC Slot is suitable for situations with high security and stability
requirements. The WinAC Slot 412/416 is similar in performance to the S7-412/416.
Category: Siemens Information – Siemens WinAC – Siemens WinAC information
classification: Product selection
Siemens WinAC OPC Communication Guide (Chinese)
Siemens
WinAC OPC Communication Guide (Chinese)
Category: Siemens Information – Siemens WinAC –
Siemens WinAC information classification: Technical manual
Siemens WinAC Basis Product
Overview Manual (Chinese)
The Windows automation center WinAC Basis runs on the user’s
PC and provides PC-based control of the user’s processes. The WinAC Basis software
contains the following products
· Windows logic controller WinAC
This paper introduces the concept and function of WinAC ODK, and introduces the
installation and development process of WinAC ODK V4.2 software.
WinAC ODK, an open
interface to WinLC RTX, provides a set of tools (functions) that take advantage of
these functions
Digital and high-level languages (C/C++, VB, C#) can be written to
interact with WinLC RTX user applications. WinAC ODK provides the following three
programming interfaces:
· CCX-Custom Code Extension (Custom Code Extension)
· SMX-
Shared Memory Extension (Shared Memory Extension)
· CMI-Controller Management Interface
(Controller Management Interface)
Category: Siemens Information – Siemens WinAC –
Siemens WinAC information classification: Technical manual
Siemens WinAC ODK Training
Course (Chinese)
WinAC ODK is an engineering software package that integrates C/C++ into
WinAC software and slot PLC.
● WinAC software and slot type PLC running interface
support wizard programming
● The programming environment uses standard C/C++ language
●
In addition to AWL, SCL, etc., C/C++ code can also be executed outside WinAC
Category:
Siemens Information – Siemens WinAC – Siemens WinAC information classification:
Technical manual
Siemens WinAC RTX 2008 Software Redundancy Function Guide (Chinese)
Software redundancy, also known as soft redundancy, is a low-cost solution for Siemens
to realize the redundancy function. It can be applied to the control system where the
switching time between the active and standby systems is seconds. It is commonly
realized by S7-300/400. But after WinAC RTX 2008, Siemens PC-Based applications also