IS200WNPSH1AAA
IS200WNPSH1AAA
IS200WNPSH1AAA
operating parameters
c
complete self-diagnosis
Compact and robust design
Front Panel
Wiring
DIN rail (U-shaped) installation well can be directly wall mounted, simple and
convenient
o
Allowable operating ambient temperature…60 C, with automatic temperature
monitoring
o
EMC (Electromagnetic Compatibility) according to EN50082
mouth
Certifications:
CE, NAMUR, CSA, CSA-NRT
Glossary
Process station:
This term is used to describe AC800F controllers (field
controllers) and rack-mounted controllers. A process station can be designed to be
redundant
configuration and non-redundant configuration.
AC800F :
This term is used to
describe the AC800F Field Controller type of process station. A redundant process
station consists of 2
AC800F controller.
Rack mounted process station:
This term is used
to describe a rack-mounted type of process station. A redundant process station
contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant
process station.
In the investment of modern automation system, due to the hardware
equipment department
It only takes up less cost in the whole system, then write
engineering applications
The cost of software becomes increasingly important. Generally
speaking, a self
The engineering application software cost of the automation project
accounts for about the entire project.
About 50%, it is not difficult to see that the
migration of cost structure creates a lot of innovation for users.
Create an opportunity
to optimize project investment, therefore, it is necessary to start from engineering
