IS220PRTDH1A
IS220PRTDH1A
IS220PRTDH1A
Basic characteristics:
1ee802.3 Ethernet standard
o
Ei801f provides 10base2 thin cable
communication interface
Ei802f provides 10BASE5 thick cable connection (through AUI
interface)
Ei803f provides 10Base-T twisted pair communication interface
32-bit data bus,
100 mb/s
DMA (direct memory access) mode main memory ram, corresponding CPU operating
load <4%
Optional ram backup battery
Fieldbus interface replacement card
fi830f/fi820f/fi810f
Fieldbus interface cards are divided into several types according
to different protocol standards. Each interface card provides – a fieldbus interface
(PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the
interface card itself and the field instrument (or remote i1/0) on the connected
fieldbus are still
It is designed by the industrial “unified tool control bui lder
without additional software. The interface card can be configured redundantly
(separated between each other
Redundant basic unit pm802f) and can be plugged in and out
and replaced online.
Fi830f: PROFIBUS DP interface card, as the master station, can
connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One
PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city
(subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f:
two serial interfaces are provided to connect the serial protocol equipment. The
maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes,
RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant
operation is realized by two redundant field controllers.
Fi8i0f card is a triple can
bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional
process control station
The i/0 protection unit of the PS is used to receive process
signals from the rack mounted i/0 modules supported by the PS. Each field controller PS