IS230PCAAH1A
IS230PCAAH1A
IS230PCAAH1A
I/0 stations and field bus instruments.
Communication between the process station,
operator station and engineering station takes place via the system bus DigiNetS
(Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick
or fiber optic cables and mixed media) and network topology can be selected for the
system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use
the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance
communication.
Subsystems such as PLC communicate with the Industrial” system through
the ModBus protocol interface. The system also supports IEC870-5 over-control
protocol.
discussion.
The Flash EPROM inside the PS provides more than 220 functional
modules (control algorithm subroutines), in addition to the basic ones specified in the
IEC 61131 3 standard
In addition to this content, many powerful and rigorously tested
function blocks from actual engineering applications have been expanded. any complex
control
The scheme can be realized by the combination of these function blocks.
The
function blocks provided by the system mainly include the following categories:
o
Analog
processing
o
digital processing
loop regulation
Logical sequence control
c
logic operation
Monitoring function
Collection function.
c
arithmetic operations
c
TCP/IP protocol
communication interface
Modbus protocol communication interface
1EC870-5 protocol
communication interface (Telecontrol)
4.2 Field Controller PS
Industrial” field