IS200DTAIH1A IS200DTAIH1A IS200DTAIH1A modules is converted to a standard digital signal at the scene, just a cable can connect all the child standing, and then sends the field signal very briefly to the control room monitoring equipment, reduces the cost, It is also easy to install and maintain, and digital data transmission makes the system…
Details
IS200DTCIH1A IS200DTCIH1A IS200DTCIH1A including the system configuration, database configuration, history library configuration, graphics configuration, control algorithm configuration, data report configuration, real-time data display, historical data, graphical display, parameter list, data printing, data input and parameter modification, control arithmetic, alarm processing, fault processing, communications control and man-machine interface and so on various aspects, And really realize…
Details
IS200DSVOH1B IS200DSVOH1B IS200DSVOH1B mainly used in sensors, actuators, electrical drives, PLC, textile and building automation, etc. The latter two series adopt RS485 communication standards, with transmission rates ranging from 9.6kbps to 12Mbps, and transmission distances ranging from 1200M to l00m (depending on the transmission rate). The basic modes of media access control are token mode…
Details
IS200DSPXH1D IS200DSPXH1D IS200DSPXH1D essential safety bus equipment. H2 is a high-speed bus with a transmission rate of 1Mbps (the transmission distance is 750m) or 2.5bps (the transmission distance is 500m). The number of nodes in each segment of H1 and H2 can reach 32, and the number can reach 240 after using repeater. Hl and…
Details
IS200DSFCG1A IS200DSFCG1A IS200DSFCG1A influential fieldbuses have appeared in the past decade, such as Foundation fieldbus FF, Profibus, CAN, LONworks, HART and so on, and have been widely used. Only the first two fieldbuses are briefly described below. 3 Introduction to main fieldbuses \ 3.1 Foundation Fieldbus FF Foundation Fieldbus is a kind of fieldbus…
Details
IS200DRLYH1A IS200DRLYH1A IS200DRLYH1A maintain the independent normal operation of the underlying equipment after it is disconnected from the upper level network, and its intelligence degree is greatly strengthened. 2.5 Highly intelligent field equipment Traditional DCS uses a relatively centralized control station, its control station is composed of CPU units and input/output units. Fieldbus control system…
Details
IS200CPFPG1A IS200CPFPG1A IS200CPFPG1A manufacturers can interconnect and realize information exchange. Users can flexibly choose fieldbus products from different manufacturers to form the actual control system to achieve the best system integration. 2.2 Interoperability Interoperability means that control devices from different vendors can not only communicate with each other, but also be configured in a unified…
Details
IS200CABPG1B IS200CABPG1B IS200CABPG1B the Control room constitute the Fieldbus Control System (FCS). By following certain international standards, fieldbus products from different manufacturers can be integrated in the same set of FCS, with interchangeability and interoperability. FCS further devolves the control function of traditional DCS to the field intelligent instrument, which completes the functions of data…
Details
IS200BPIAG1A IS200BPIAG1A IS200BPIAG1A the upper Intranet and Internet information network. Therefore, the distributed control system from this point of view is essentially a closed and special, not interoperable distributed control system and DCS cost is expensive. In this case, the users of the network control system to open and reduce the cost of urgent requirements.…
Details
IS200BPIAG1A IS200BPIAG1A IS200BPIAG1A efficiency and reliability of the controller will decline sharply. 3. Distributed control system (DCS) : Distributed control system (DCS) dominated in the 1980s and 1990s. Its core idea is centralized management, decentralized control, that is, management and control are separated, the upper computer is used for centralized monitoring management function, a number…
Details