While JDSU may not actively promote this specific model anymore, Lumentum Holdings Inc. might have some legacy information on their website:
Look for resources mentioning “JDSU 2213” or similar models. These resources might provide clues about the functionalities of the 7STSLKTB variant.
Consider searching online forums or communities frequented by engineers familiar with industrial steam turbines or JDSU control systems. They might have knowledge or experience with this specific model.
Alternatives:
If you’re working on a new project or require long-term support, consider using newer Lumentum Holdings Inc. or other manufacturers’ steam turbine governor controls offering:
PPD103: Likely a series code for ABB’s medium-voltage drives.
BO3: Might indicate specific features or variants within the PPD103 series (without referring to ABB’s documentation, pinpointing the exact functionality is difficult).
10: Possible value or rating (interpretation depends on the specific drive series).
150000: Likely a current rating in amperes (A), indicating a maximum continuous current output of 150,000 amperes.
Function:
A medium-voltage drive is a power electronic device that controls the speed and torque of AC motors powered by medium-voltage (MV) electrical grids (typically ranging from 2.3 kV to 35 kV). They are used in various industrial applications requiring high power, such as:
System Compatibility: If you’re looking for a replacement, ensure the new contactor or relay is compatible with your existing system in terms of:
Voltage rating (AC or DC)
Current rating (must be sufficient for your application)
Coil voltage (control circuit voltage)
Number of contacts (normally open and normally closed)
Mounting style (contactor) or terminal configuration (relay)
By using these suggestions and considering the alternatives, you can increase your chances of finding the information you need about the ABB 5SHY404SL0004 contactor/relay or a suitable replacement for your application.
Availability: Finding new units of the PM866AK02 might be limited depending on its production status. Consider contacting ABB directly or the suppliers mentioned above to inquire about availability or potential replacements for redundant configurations within the AC 800M system.
System Upgrade: If you’re working on a new project or require long-term support, consider migrating to newer ABB automation systems with readily available components and ongoing technical support for redundant configurations.
Compatibility: Ensure any replacement processor unit you consider is compatible with your existing AC 800M system and communication protocols.
Datasheet: Look for the official datasheet for the FANUC A81L-0001-0165. This document provides detailed information about the component’s specifications, wiring diagrams, and performance curves. You can try searching online or contacting FANUC support for the datasheet.
Online Retailers and Parts Suppliers: Several online retailers and industrial automation parts suppliers sell FANUC A81L-0001-0165 line reactors or compatible replacements. They might have datasheets or specifications available on their websites. Here are some examples:
Additional Considerations:
Compatibility: When replacing a line reactor, ensure the new unit is compatible with your specific FANUC CNC system’s voltage rating and current requirements.
Alternatives: Depending on availability and your requirements, consider compatible line reactors from other manufacturers as long as the specifications (inductance, current rating, voltage rating) are suitable for your CNC system.
Technical Support: If you require further assistance or have questions about compatibility or installation, consider contacting FANUC support or a qualified industrial automation technician.
Language Barrier: If using Japanese websites, translation tools might be necessary to navigate and understand the content.
Limited Availability of Information: Due to the product’s age and potential niche use, comprehensive information might be scarce.
If you have any additional details about the FC-9821X MODEL2, such as its physical appearance, any ports or connectors, or any context about where you encountered this model number, it might help narrow down the possibilities and refine the search for information.
PLC Compatibility: Ensure the SST-1500-YCX-3-1-0 is compatible with the specific PLC model used in your automation system [1, 2, 5]. Refer to PLC user manuals for compatible input modules.
Programming: The PLC program needs to be configured to communicate with the analog input module and interpret the received digital data for proper operation within your system [1, 2, 5].
If you’re working on an automation system that uses the SST-1500-YCX-3-1-0 analog input module, consulting the user manual (if available) or contacting the distributor/supplier is recommended. They can provide the most accurate details about compatibility, configuration, and ensure successful integration within your specific system.
Input Voltage: The servo amplifier likely has a specific input voltage rating (e.g., 283-325V AC) to match the robot’s power supply [1, 2, 3, 4, 5]. Refer to the user manual or datasheet for details (if available).
Output Current: The amplifier will have a maximum output current rating (in Amps) that determines the power it can deliver to the motor [1, 2, 3, 4, 5]. User manual confirmation is needed.
Compatible Motor Power: The A06B-6079-H106 is likely designed for a specific range of AC servo motor power ratings (e.g., motors in the A Series – Alpha Servo Drives) [1, 2, 3, 4, 5]. User manual confirmation is needed.
Control Interface: The communication protocol between the servo amplifier and the robot controller (e.g., analog or digital) [1, 2, 3, 4, 5]. User manual confirmation is needed.
Obtaining detailed specifications, wiring diagrams, and installation instructions for the FANUC A06B-6077-H106 is crucial for proper operation and safety within your robot or machine. Here are ways to learn more about the power supply module:
FANUC Website: If the model number is listed on a FANUC robot or machine, search the FANUC website for user manuals, datasheets, or spare parts catalogs using the model number [1].
Distributor or Supplier: If you purchased the power supply module from a FANUC authorized distributor or supplier, they might have technical information or resources available [2, 3, 4].
Contact FANUC Support: Reach out to FANUC customer support for the Robotics business unit. They can provide the most accurate and up-to-date information on the A06B-6077-H106, including:
User manuals and datasheets (if available)
Compatibility information for specific FANUC robot models
Obtaining detailed specifications, wiring diagrams, and installation instructions for the FANUC A06B-0116-B203#0100 is crucial for proper installation and operation within your robot or machine. Here are ways to learn more about the servo motor:
FANUC Website: If the model number is listed on a FANUC robot or machine, search the FANUC website for user manuals, datasheets, or spare parts catalogs using the model number [1].
Distributor or Supplier: If you purchased the servo motor from a FANUC authorized distributor or supplier, they might have technical information or resources available [2, 3, 4].
Contact FANUC Support: Reach out to FANUC customer support for the Robotics business unit. They can provide the most accurate and up-to-date information on the A06B-0116-B203#0100, including:
User manuals and datasheets (if available)
Compatibility information for specific FANUC robot models
System Integration: The A81L-0001-0165 line reactor is likely one component within a larger FANUC automation system. Proper configuration depends on the overall system design, power requirements, and other electrical components [1, 2, 3, 4].
Electrical Expertise: Installation and configuration of the line reactor might require electrical expertise to ensure safe and proper operation within the automation system [1, 2, 3, 4].
If you’re working on a FANUC automation system that includes the A81L-0001-0165 line reactor, consulting the user manual or contacting FANUC support is highly recommended. They can provide the most accurate details about proper configuration, compatibility, and ensure safe and reliable operation within your specific system.
Robot arm joint positions and movements [1, 2, 3, 4].
Conveyor belt speed control [1, 2, 3, 4].
Spindle rotation and speed control in CNC machines [1, 2, 3, 4].
Finding More Information:
Obtaining detailed specifications, wiring diagrams, and installation instructions for the FANUC A860-0326-T103 is essential for proper installation and operation within your robot or machine. Here are ways to learn more about the encoder:
FANUC Website: If the model number is listed on a FANUC robot or machine, search the FANUC website for user manuals, datasheets, or spare parts catalogs
While the exact functionality is evident, obtaining detailed specifications and installation instructions for the FANUC A230-0604-X003 is recommended for proper use within your FANUC system. Here are ways to learn more about the fan cover:
FANUC Website: While user manuals might not be readily available online, consider searching the FANUC website for spare parts catalogs or contacting their support for information on obtaining manuals specific to your Alpha-i servo system [1].
Parts Suppliers: Look for the fan cover on websites of authorized FANUC parts suppliers. These websites might offer more details, including dimensions and compatibility information [2, 3, 4]. However, the information might not be from the official source (FANUC).
Contact FANUC Support: Reach out to FANUC customer support for the Robotics business unit. They can provide the most accurate and up-to-date information on the A230-0604-X003, including:
Compatibility with specific Alpha-i servo PSM models
User manuals or installation guides (if available)
Obtaining detailed specifications, wiring diagrams, and troubleshooting information for the FANUC A20B-8200-0927 is crucial for proper maintenance and repair procedures. Here are ways to learn more about the control PCB:
FANUC Website: If the model number is listed on a FANUC robot or controller, search the FANUC website for user manuals, datasheets, or spare parts catalogs using the model number [1].
For detailed specifications, wiring instructions, and configuration steps, consulting the user manual is crucial for proper use within your ABB automation system. Here’s how to find more information:
ABB Website: Search for “ABB AX722F 3BDH000377R0001 user manual” on the ABB website. They might offer downloads and manuals for their products [1].
Online Resources: Look for the user manual or datasheet online using the provided part number. You might find PDFs on automation parts supplier websites or engineering forums, but the information could be outdated [2, 3, 4, 5].
ABB Customer Support: Contact ABB customer support for the Industrial Automation or Control Products business unit. They can provide the most up-to-date information on the AX722F, including:
User manuals and datasheets
Compatibility details for ABB automation system components
