Showing 1217–1232 of 26913 results

DDK NFT-202RM3A-S

  • Since the Daiichi Dentsu website might be primarily in Japanese, you may need to use a translation tool to navigate and understand the information.

  1. Industrial Automation Parts Suppliers (Use with Caution):

    • Some industrial automation parts suppliers might list the DDK NFT-202RM3A-S for purchase or offer downloadable resources. However, use caution regarding the source and ensure it’s a reputable supplier:
      • Examples include AutomationDirect

  2. Contact DDK Support:

DDK NFT-051RM1-S1

Finding Specific Information:

Obtaining detailed specifications, wiring diagrams, and compatibility information for the DDK NFT-051RM1-S1 can be achieved through the following resources:

  1. Daiichi Dentsu Website (Japanese):
    • Search the Daiichi Dentsu website (in Japanese) for the NFT-051RM1-S1 product page using its complete model number. If available, you should find a datasheet or user manual with comprehensive details such as:
      • Confirmation of its compatibility with specific DDK AFC1500 nut runner models (critical information).
      • Electrical specifications (power supply requirements, I/O connectivity details).
      • Torque control range and accuracy (might be limited by the compatible nut runner model).
      • Programming or configuration instructions (if applicable).
      • Wiring diagrams for connecting to the nut runner motor and a PLC

DDK NFT-132RM3-S

  • Daiichi Dentsu Website (Japanese):
    • Search the Daiichi Dentsu website (in Japanese) for the NFT-132RM3-S product page using its complete model number. If available, you should find a datasheet or user manual with comprehensive details such as:
      • Confirmation of its maximum torque output and speed range.
      • Electrical specifications (power supply requirements, I/O connectivity details).
      • Programming or configuration instructions (if applicable).
      • Wiring diagrams for power connection and control signals.
      • Dimensions and weight information.

 

YOKOGAWA NFDV551-P60S2

Yokogawa Website:

    • Search the Yokogawa website for the NFDV551-P60S2 product page using its complete model number. If available, you should find a datasheet or user manual with comprehensive details such as:
      • Specific pressure measurement range (e.g., psig, bar, MPa).
      • Accuracy specifications.
      • Supported output signal type (e.g., Modbus RTU, HART communication protocol).
      • Electrical specifications (power supply requirements).

YOKOGAWA NFDV157-SOO S2

  • Search the Yokogawa website for the NFDV157-SOO S2 product page using its complete model number. If available, you should find a datasheet or user manual with comprehensive details such as:
    • Specific differential pressure measurement range.
    • Accuracy specifications.
    • Supported output signal type (e.g., Modbus RTU, HART communication protocol).
    • Electrical specifications (power supply requirements).
    • Process connection type and material information.
    • Installation instructions and wiring diagrams.

YOKOGAWA NFAI841

  1. Contact Yokogawa Support:

    • Contact Yokogawa’s technical support team and provide the complete model number (NFAI841) and any questions you have about its functionalities or suitability for your application. They are the most reliable source for definitive information and can assist you with:
      • Identifying the specific capabilities and communication protocol of your NFAI841 variant.
      • Obtaining the correct user manuals or datasheets.
      • Ensuring compatibility with your existing control system’s communication protocol.
      • Troubleshooting any issues with the NFAI841.

Overall:

The Yokogawa NFAI841 is an analog I/O module for industrial automation applications. By using the suggested resources and contacting Yokogawa support if necessary, you should be able to determine the specific features and suitability of the NFAI841 for your analog signal processing needs within your control system.

YOKOGAWA NFDR541

  1. Yokogawa Website:

    • Search the Yokogawa website for the NFAI841 product page using its complete model number. If available, you should find a datasheet or user manual with comprehensive details such as:
      • Specific number of analog input and output channels.
      • Supported input and output voltage/current ranges.
      • Communication protocol details (Modbus RTU, HART compatibility).
      • Wiring diagrams for connecting sensors, actuators, and the control system.
      • Calibration procedures.

Schneider NF240PSG3

  1. Important Considerations:

    • Power Rating: Before using the NF240PSG3, ensure the total current draw of all the devices you intend to connect does not exceed the unit’s output current rating (refer to the datasheet). Exceeding the current rating can overload and damage the power supply.
    • Compatibility: Verify that the NF240PSG3 is compatible with the specific model of your Schneider Electric Powerlink panelboard.

    Overall:

    The Schneider Electric NF240PSG3 is a power supply unit for mounting within a Powerlink panelboard, providing 24VDC power for various electronic devices. By using the provided resources and contacting Schneider Electric support if necessary, you can ensure its suitability and safe operation within your specific

ABB NETA-01

    • Contact ABB’s technical support team and provide the complete model number (NETA-01) and any contextual information you have about its application. They are the most reliable source for definitive information and can assist you with:
      • Identifying the specific configuration required for your network.
      • Obtaining the correct user manuals or datasheets.
      • Troubleshooting any connection issues with the NETA-01.

Overall:

The ABB NETA-01 is an Ethernet adapter module for connecting ABB industrial automation equipment to an Ethernet network. By using the suggested resources and considering contextual clues, you should be able to determine the specific configuration and function of the NETA-01 within your system. If necessary, contacting ABB support can provide the most up-to-date information.

ABB NDSC-02

Obtaining detailed information about the ABB NDSC-02, including its specific application and functionalities, can be achieved through the following resources:

  1. ABB Website:

    • Search the ABB website for the NDSC-02 product page or user manual using its complete model number. If available, you should find information such as:
      • Compatibility with specific ABB products (e.g., drive models, inverter models).
      • Circuit diagrams or schematics for understanding its functionality.
      • Information on the type of diodes it controls (e.g., rectifier diodes, freewheeling diodes).

ABB NDPA-02

  • The ABB NDPA-02 likely functions as a PC Card (also known as PCMCIA card) adapter module that allows a computer to communicate with ABB drives through the DriveWare software.
  • The DriveWare software provides a user interface for:
    • Programming ABB drives to control motor operation (e.g., speed, torque)
    • Monitoring drive performance and diagnostics
    • Configuring drive parameters

ABB PCD231B101

    • Contact ABB’s technical support team and provide the complete model number (PCD230A) and any questions you have about its function or compatibility with your ABB AC 500 control system. They are the most reliable source for definitive information and can assist you with:
      • Identifying the specific variant and function (PLC or remote I/O module) of your PCD230A.
      • Obtaining the correct user manuals or datasheets.
      • Troubleshooting any issues with the PCD230A.

Overall:

The ABB PCD230A is either a PLC or a remote I/O module for the ABB AC 500 control system. By using the suggested resources and contacting ABB support if necessary, you should be able to determine the specific function and features of your PCD230A to confirm its suitability for your industrial automation application.

ABB PCD230A

Possible Features (depending on variant):

  • Digital Inputs and Outputs (I/O): Terminals for connecting various sensors, switches, and actuators.
  • Analog Inputs and Outputs (optional): For interfacing with sensors or devices that provide analog signals (e.g., voltage or current).
  • Communication Ports: For connecting to a programming tool or a supervisory control and data acquisition (SCADA) system.
  • Processing Power and Memory: Varies depending on the specific m
  • odel variant, but enough to handle the programmed control logic for the application.

Finding Specific Information:

ARTESYN NFS80-7606J

  • Search online for the “Artesyn NFS80-7606J datasheet”. This will provide the most comprehensive information about the power supply, including:
    • Detailed electrical specifications (input voltage range, output voltage tolerances, current ratings).
    • Mechanical specifications (dimensions, weight, mounting options).
    • Environmental specifications (operating temperature range, humidity).
    • Safety and regulatory certifications.
    • Connection diagrams and pinouts.
    • Typical performance curves.

YOKOGAWA NFCP100-S00 S3

  • Processing power and memory capacity to handle the specific control logic requirements of the application.
  • Communication ports for connecting with other modules in the STARDOM system (like input/output modules and communication modules).
  • Support for programming languages compliant with the IEC 61131-3 standard, commonly used for industrial automation control logic.
  • Potential for a Java virtual machine (JVM) to run Java applications for more complex control tasks (uncertain for this specific model).

Finding Specific Information (Use with Caution):

Since the Yokogawa NFCP100-S00 S3 is likely discontinued, obtaining detailed information might be challenging. Here are some resources, but be cautious about the accuracy and completeness of the information:

YOKOGAWA NFCP100-15

Alternatives and Considerations:

  • If your application requires a CPU module for a Yokogawa STARDOM system, consider exploring Yokogawa’s current product offerings. Their website should have information on compatible and up-to-date CPU modules.
  • Upgrading to a newer CPU module might offer improved processing power, communication capabilities, and potential security benefits compared to a discontinued model.
  • Consult Yokogawa’s technical support for recommendations on CPU modules compatible with your specific STARDOM system configuration.

Overall:

The Yokogawa NFCP100-15 was likely a CPU module for a Yokogawa STARDOM control system. While information about this specific model might be limited due to potential discontinuation, the provided resources can offer a general understanding of its function. If you require a CPU module for your STARDOM system, explore Yokogawa’s current offerings or consult their support team for the most suitable options.