Measuring Range: Lower detection limit (LDL) of 125 ppm (parts per million) Note: Datasheet reference is recommended for confirmation as sensor performance can vary based on test environment and sampling conditions.
Linearity: Likely offers a linear response within the specified measuring range for accurate hydrogen concentration detection. Refer to the datasheet for specific details.
Flow Rate: 500 mL/min (milliliters per minute)
Transport Time: 2 to 30 seconds (represents the time it takes for a gas sample to reach the sensor)
Supply Voltage: 24 VDC (Volts of Direct Current) with specific voltage range and current draw specifications (refer to datasheet).
Signal Output: 3 alarm relays and a 4-20 mA current loop output for integration with control systems.
Compact Size: The Micro850 is a compact PLC, making it suitable for applications where space is limited. It is available in both brick and DIN rail mount styles.
Scalability: The Micro850 offers a range of I/O (input/output) points, from 20 to 96, allowing it to be scaled to meet the needs of different applications.
Programming Options: The Micro850 can be programmed using various methods, including ladder logic, function block diagram, and structured text, catering to different programmer preferences and skill levels.
Communication Capabilities: The Micro850 supports various communication protocols, including Modbus, Ethernet/IP, and DeviceNet, enabling it to integrate with other devices and control networks.
Ease of Use: The Micro850 is designed to be easy to use, with a user-friendly interface and comprehensive programming software.
058 – Potentially voltage or winding configuration (specific details require datasheet)
PG1 – Continuous torque (permanent magnet), Shaft seal
BA – Possible digital servo feedback with encoder (datasheet confirmation needed)
Industrial Automation Suppliers: Look for websites of industrial automation suppliers who might carry Bosch Rexroth products. These suppliers might have technical specifications or manuals available for download.
Contact Bosch Rexroth: If online resources are unsuccessful, try contacting Bosch Rexroth directly through their website or regional offices. Their contact information can likely be found on their website.
Additional Notes:
The information provided here is based on general characteristics of the REXROTH MHD series and might not be entirely specific to the MHD115C-058-PG1-BA variant. Refer to official Bosch Rexroth documentation for the most accurate details.
If you have context about the application where this motor is used, it might help narrow down the functionalities (presence/absence of encoder) and the specific power output.
Machine tools (rotary tables, tool changers): Precise positioning and control for tasks like moving rotary tables or operating tool changers in CNC machines and machining centers.
Robotics (articulated robots – smaller arms): Controlling the movement of smaller robot arms for various tasks like assembly, sorting, and pick-and-place operations.
Printing and packaging (registration, cutting): Precise control of registration and cutting mechanisms in packaging machinery where a compact motor design is preferred.
Food and beverage processing (filling machines): Precise positioning and control for operating filling machines or other equipment requiring accurate movements in potentially harsh environments (due to the IP65 rating).
Electronic manufacturing (placement machines): Controlling the movement of pick-and-place heads in electronic assembly machines for precise component placement.
Finding More Information:
Here are some resources to learn more about the specific details and functionalities of the EMERSON MHM-490-CONS-0000 motor:
Emerson Industrial Automation Website: Search the Emerson Industrial Automation website for product catalogs, datasheets, or manuals for the specific
A – Variant code (specific details require Kollmorgen confirmation)
1056 – Potentially voltage or winding configuration (specific details require Kollmorgen confirmation)
N – Three-phase AC input (possible interpretation)
00 – Frame size or other motor specifications (possible interpretation, but unconfirmed)
Kollmorgen Documentation: Search the Kollmorgen website for product catalogs, datasheets, or manuals that might mention the MHDA1056N00 model number. Pay close attention to the category (motors or drives) while searching.
Schneider Electric Website: Search the Schneider Electric website for product catalogs, datasheets, or manuals for the specific model number. You can find their product information section here:
Model Number Breakdown (possible interpretation):
MHDA – Servo Drive series
10 – Continuous power rating in kVA (10 = 10 kVA)
28 – Voltage rating (28 = three-phase AC)
N – Three-phase AC input
00 – IP65 enclosure rating
Industrial Automation Suppliers: Look for websites of industrial automation suppliers who might carry Schneider Electric products. These suppliers might have technical specifications or manuals available for download.
Contact Schneider Electric: If online resources are unsuccessful, try contacting Schneider Electric directly through their website or regional offices. Their contact information can likely be found on their website.
Additional Notes:
The information provided here is based on general characteristics of the SCHNEIDER MHDA series and might not be entirely specific to the MHDA1028N00 variant. Refer to official Schneider Electric documentation for the most accurate details.
If you have context about the specific application where this servo drive is used, it might help narrow down the exact functionalities and power requirements.
Machine Tools (Medium to Heavy-Duty): Driving spindles and feed axes in CNC machines and machining centers that don’t require liquid cooling.
Material Handling (Moderate to Heavy Loads): Powering conveyors, elevators, and other equipment handling substantial loads.
Pumps and Fans (High-Performance): Operating high-performance pumps and fans in industrial processes.
Textile Machinery (High-Power Weaving/Knitting): Driving weaving and knitting machines requiring efficient and reliable operation at higher power levels.
Food and Beverage Processing (Medium-Duty Mixing/Grinding): Powering mixers, grinders, and other equipment in food and beverage production, suitable for applications that don’t require liquid cooling.
PG1 – Continuous torque (permanent magnet), Shaft seal
AA – Possible digital servo feedback with encoder (datasheet confirmation needed)
Industrial Automation Suppliers: Look for websites of industrial automation suppliers who might carry Bosch Rexroth products. These suppliers might have technical specifications or manuals available for download.
Contact Bosch Rexroth: If online resources are unsuccessful, try contacting Bosch Rexroth directly through their website or regional offices. Their contact information can likely be found on their website.
Additional Notes:
The information provided here is based on general characteristics of the REXROTH MHD series and might not be entirely specific to the MHD093C-058-PG1-AA variant. Refer to official Bosch Rexroth documentation for the most accurate details.
058 – Potentially voltage or winding configuration (specific details require datasheet)
PG1 – Continuous torque (permanent magnet), Shaft seal
AA – Possible digital servo feedback with encoder (datasheet confirmation needed)
Industrial Automation Suppliers: Look for websites of industrial automation suppliers who might carry Bosch Rexroth products. These suppliers might have technical specifications or manuals available for download.
Contact Bosch Rexroth: If online resources are unsuccessful, try contacting Bosch Rexroth directly through their website or regional offices. Their contact information can likely be found on their website.
Additional Notes:
The information provided here is based on general characteristics of the REXROTH MHD series and might not be entirely specific to the MHD093C-058-PG1-AA variant. Refer to official Bosch Rexroth documentation for the most accurate details.
If you have any context about the application where this motor is used, it might help narrow down the functionalities (presence/absence of encoder) and the specific power output.
Variant Code: It could be a specific variant code within the MHD093C-058-NG0 series, potentially indicating slight variations in specifications not reflected in the core model number.
Order Code: In some cases, “RN” might be used as a generic order code appended to the base model number for internal tracking or ordering purposes.
Finding More Information:
Here are some resources to learn more about the specific details and functionalities of the REXROTH MHD093C-058-NG0-RN motor:
Bosch Rexroth Website: Search the Bosch Rexroth website for product catalogs, datasheets, or manuals for the specific model number, including any mention of
Machine tools (rotary tables, tool changers): Precise positioning and control for tasks like moving rotary tables or operating tool changers in CNC machines and machining centers, particularly for applications where space is limited.
Robotics (articulated robots – smaller arms): Controlling the movement of smaller robot arms for various tasks like assembly, sorting, and pick-and-place operations.
Printing and packaging (registration, cutting): Precise control of registration and cutting mechanisms in packaging machinery where a compact motor design is preferred.
Electronic manufacturing (placement machines): Controlling the movement of pick-and-place heads in electronic assembly machines for precise component placement.
Food and beverage processing (filling machines): Precise positioning and control for operating filling machines or other equipment requiring accurate movements
Machine tools (rotary tables, tool changers): Precise positioning and control for tasks like moving rotary tables or operating tool changers in CNC machines and machining centers, particularly for applications where space is limited.
Robotics (articulated robots – smaller arms): Controlling the movement of smaller robot arms for various tasks like assembly, sorting, and pick-and-place operations.
Printing and packaging (registration, cutting): Precise control of registration and cutting mechanisms in packaging machinery where a compact motor design is preferred.
Electronic manufacturing (placement machines): Controlling the movement of pick-and-place heads in electronic assembly machines for precise component placement.
Food and beverage processing (filling machines): Precise positioning and control for operating filling machines or other equipment requiring accurate movements.
Finding More Information:
Here are some resources to learn more about the specific details and functionalities of the REXROTH MHD093C-035-PG1-AA motor:
Bosch Rexroth Website: Search the Bosch Rexroth website for product catalogs, datasheets, or manuals for the specific model number. You can find their product
Machine Tools (High-Performance): Driving spindles and feed axes in CNC machines and machining centers, particularly for large workpieces or demanding machining processes.
Robotics: Controlling the movement of powerful robots for tasks like welding, assembly, and material handling of heavy objects.
Printing and Packaging (High-Speed): Precise control of web tension, registration, and cutting mechanisms in high-speed printing and packaging machinery.
Textile Machinery: Driving weaving and knitting machines requiring high precision and speed control.
Food and Beverage Processing (Large-Scale): Powering mixers, grinders, and other heavy-duty equipment in large-scale food and beverage production facilities.
Finding More Information:
Here are some resources to learn more about the specific details
Material handling equipment (lighter loads): Powering conveyors, elevators, and other equipment handling loads that don’t require high power.
Packaging machinery (auxiliary functions): Operating auxiliary functions in packaging lines that benefit from a space-saving design.
Machine tools (auxiliary functions): Potentially used for functions in machine tools where a smaller motor size is advantageous.
Textile machinery (lighter applications): Driving weaving and knitting machines in textile production processes where a compact motor is suitable.
Food and beverage processing (lower-power applications): Powering mixers, grinders, and other equipment in food and beverage production, particularly for
The information provided here is based on general characteristics of the REXROTH MHD series and might not be entirely specific to the MHD093B-058-NG0-AA variant. Refer to official Bosch Rexroth documentation for the most accurate details.
If you have any context about the application where this motor is used, it might help narrow down the functionalities (presence/absence of encoder) and the specific power output.
Machine tools: High-performance applications in CNC machines and machining centers, particularly for larger workpieces or demanding machining processes.
Robotics: Controlling the movement of powerful robots for tasks like welding, assembly, and material handling of heavy objects.
Printing and packaging: Precise control of web tension, registration, and cutting mechanisms in high-speed printing and packaging machinery.
Textile machinery: Driving weaving and knitting machines requiring high precision and speed control.
Food and beverage processing: Powering mixers, grinders, and other heavy-duty equipment in food and beverage production, particularly for large-scale operations.
Finding More Information:
Here are some resources to learn more about the specific details and functionalities of the REXROTH MHD093B-035-PP1-BA motor
